In this Innokin Coolfire Pebble review, we will take a look at this new starter kit and see what it is new compared to their previous Coolfire range.
Innokin‘s has released another product to their Coolfire range – this time it is the Innokin Coolfire Pebble Kit. The difference with this one is that it contains a new slipstream tank along with the Mod, described by Innokin as a complete vaping system.
The Coolfire Pebble looks completely difference to other ones in their range and is a much smaller design.
As with all Coolfire Mods they have some of the most advanced safety features, this includes a 15 second cut off timer, short circuit/atomizer protection, over-discharge and overheat protection.
In the box, you get the Coolfire Pebble Mod, Slipstream Tank, User Manual, Micro USB Cable, Spare o-rings, stainless steel drip tip and spare coil.
Measuring at only 22mm width, 34mm depth and 55mm height it is sure a small mod. Compared to the Coolfire 4 TC 18650 it is much smaller as demonstrated in the video. When holding in your hand then it almost disappears.
The slipstream tank measures at 21mm, the maximum tank width would be 22mm before it starts to hang over the side of the mod.
The micro USB connector can be found at the bottom of the mod, personally, we prefer to have the connector on the side. As always with Innokin you can vape and charge with this device.
There are a range of colours available including black, coffee, dark blue, white and gold.
The screen contains the usual battery level, ohm reading, The screen is very small but it is very vibrant and visible.
It has a range of 6 – 50 watts power with precise output so it will power a range of tanks but there is no temperature control on this mod.
The battery is built in with a 1300 mAh capacity unlike some of the Coolfire range which let you use 18650 battery. Using the included tank at a high wattage will not last very long. You can use it whilst charging.
When you press the fire button it indicates green to state the battery level.
We are not sure why Innokin has called it a Coolfire because it is so different to their previous models.
The best features with this Mod is the size and would be perfect for traveling, also reaching out to the market for those new to vaping.
The Innokin Coolfire Pebble is well worth stocking in your shop. Innokin has always provided reliable and quality products in our opinion.
We hope you enjoyed our Innokin Coolfire Pebble review and please leave any comments below if you are stocking this product in your shop.
RRP price for this is around £35 so provides an affordable priced starter kit for customers.